Difference between revisions of "Outlook"

From Netsville Support
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
 
= Add Account Instructions =
 
= Add Account Instructions =
 
This page describes how to set up your Microsoft Outlook to work with mail from Netsville's servers.  The most recent instructions are also described on Microsoft's Office website at this link http://office.microsoft.com/en-us/outlook-help/add-or-remove-an-email-account-HA010354414.aspx if you need further details.
 
This page describes how to set up your Microsoft Outlook to work with mail from Netsville's servers.  The most recent instructions are also described on Microsoft's Office website at this link http://office.microsoft.com/en-us/outlook-help/add-or-remove-an-email-account-HA010354414.aspx if you need further details.
 +
 +
== 2016 ==
 +
 +
#Open Outlook
 +
#'''File->Info->Add Account'''
 +
#:[[File:Outlook2016_setup_01.png]]
 +
#Choose Manual setup or additional server types then hit '''NEXT'''
 +
#:[[File:Outlook2016_setup_02.png]]
 +
#Choose POP or IMAP then hit '''NEXT'''
 +
#:[[File:Outlook2016_setup_03.png]]
 +
#On the POP and IMAP Account Settings page, fill in using the screenshot below as a guide
 +
#:*Your Name
 +
#:*Email Address
 +
#:*Account Type ('''must be IMAP!!''')
 +
#:*Incoming Server: '''securemail.netsville.com'''
 +
#:*Outgoing Server: '''securemail.netsville.com'''
 +
#:*User Name - '''put your full email address here!!'''
 +
#:*Password
 +
#:Now you may click '''MORE SETTINGS'''
 +
#:[[File:Outlook2016_setup_04.png]]
 +
#Click '''Outgoing Server''' and select [x] My outgoing server (SMTP) requires authentication
 +
#:Confirm "Use same settings as my incoming mail server" is selected
 +
#:[[File:Outlook2016_setup_05a.png]]
 +
#Click '''Advanced''' tab and use the screenshot below as a guide for what to fill in
 +
#:*Choose '''SSL''' for Incoming server encrypted connection and the Incoming server (IMAP) port will change to '''993'''
 +
#:*Type in '''587''' for Outgoing server(SMTP) port and choose '''TLS''' for encrypted connection.
 +
#:Now you may click '''OK'''
 +
#:[[File:Outlook2016_setup_05.png]]
 +
#You should be back at the '''POP and IMAP Account Settings''' page.
 +
#:Click '''NEXT''' and it should attempt to test your connection
 +
#:Hopefully you should see a successful pop-up like the one below
 +
#:[[File:Outlook2016_setup_06.png]]
 +
 
== 2010 ==
 
== 2010 ==
 +
 
#Open Outlook
 
#Open Outlook
 
#'''File->Info->Add Account'''
 
#'''File->Info->Add Account'''
Line 10: Line 44:
 
#When you return to this page, select '''Manually Configure...''' at the bottom.
 
#When you return to this page, select '''Manually Configure...''' at the bottom.
 
#:[[File:Manually Configure.jpg]]
 
#:[[File:Manually Configure.jpg]]
−
[[File:5.jpg]]
+
#Choose '''Internet Email''' for the service.
−
 
+
#:[[File:5.jpg]]
−
[[File:16.jpg]]
+
#Fill out your Information on this page based on your email credentials.  We '''strongly''' recommend that you choose '''IMAP''' as the Account Type.  Also note that '''User Name''' and '''Email Address''' must be the same.  Any time you are asked to provide the name of a server, use '''securemail.netsville.com'''.
−
 
+
#:[[File:16.jpg]]
−
[[File:18.jpg]]
+
#Alright, now we're getting into the meat of it.  The first thing you want to do is change the '''encrypted connection''' under Incoming server to '''SSL'''.  This will automatically change the port to '''993'''.  If you had selected '''POP3''' on the previous page, the port would be '''995'''.  We are showing '''993''' here because we chose '''IMAP'''.  Under '''Outgoing server''', change the '''encrypted connection''' to '''TLS'''.  You may need to type in the port number '''587''' if it doesn't change automatically.
−
 
+
#:[[File:18.jpg]]
−
[[File:11.jpg]]
+
#Now click on the '''Outgoing Server''' tab at the top of the '''Internet E-mail Settings''' dialog box.  <font color=red>THIS IS THE MOST IMPORTANT SCREEN IN THESE INSTRUCTIONS!</font> It may look different depending on whether you've chosen '''POP3''' or '''IMAP'''.  But the important thing remains the same:  '''Always choose My outgoing server (SMTP) requires authentication'''.  And you have a choice at this point.  Either click '''Use same settings as incoming mail server''' or type everything in under '''Log on using'''.  We have chosen to fill this out to demonstrate what it looks like. 
−
 
+
#:[[File:11.jpg]]
−
[[File:13.jpg]]
+
#After you click '''OK''' you will be back at the '''Add New Account''' dialog box.  Click the '''Test Account Settings''' button.
−
 
+
#:[[File:13.jpg]]
−
[[File:14.jpg]]
+
#If everything has been typed in correctly, you should see this Congratulations dialog.  You're done!
 +
#:[[File:14.jpg]]
  
 
== 2007 ==
 
== 2007 ==

Latest revision as of 18:10, 16 May 2018

Add Account Instructions

This page describes how to set up your Microsoft Outlook to work with mail from Netsville's servers. The most recent instructions are also described on Microsoft's Office website at this link http://office.microsoft.com/en-us/outlook-help/add-or-remove-an-email-account-HA010354414.aspx if you need further details.

2016

  1. Open Outlook
  2. File->Info->Add Account
    Outlook2016 setup 01.png
  3. Choose Manual setup or additional server types then hit NEXT
    Outlook2016 setup 02.png
  4. Choose POP or IMAP then hit NEXT
    Outlook2016 setup 03.png
  5. On the POP and IMAP Account Settings page, fill in using the screenshot below as a guide
    • Your Name
    • Email Address
    • Account Type (must be IMAP!!)
    • Incoming Server: securemail.netsville.com
    • Outgoing Server: securemail.netsville.com
    • User Name - put your full email address here!!
    • Password
    Now you may click MORE SETTINGS
    Outlook2016 setup 04.png
  6. Click Outgoing Server and select [x] My outgoing server (SMTP) requires authentication
    Confirm "Use same settings as my incoming mail server" is selected
    Outlook2016 setup 05a.png
  7. Click Advanced tab and use the screenshot below as a guide for what to fill in
    • Choose SSL for Incoming server encrypted connection and the Incoming server (IMAP) port will change to 993
    • Type in 587 for Outgoing server(SMTP) port and choose TLS for encrypted connection.
    Now you may click OK
    Outlook2016 setup 05.png
  8. You should be back at the POP and IMAP Account Settings page.
    Click NEXT and it should attempt to test your connection
    Hopefully you should see a successful pop-up like the one below
    Outlook2016 setup 06.png

2010

  1. Open Outlook
  2. File->Info->Add Account
    AddAccount.jpg
  3. Type in your name, email address, and password. After you click Next, Outlook will try to configure the settings automatically. But this might not work.
    AddNewAccount.jpg
  4. When you return to this page, select Manually Configure... at the bottom.
    Manually Configure.jpg
  5. Choose Internet Email for the service.
    5.jpg
  6. Fill out your Information on this page based on your email credentials. We strongly recommend that you choose IMAP as the Account Type. Also note that User Name and Email Address must be the same. Any time you are asked to provide the name of a server, use securemail.netsville.com.
    16.jpg
  7. Alright, now we're getting into the meat of it. The first thing you want to do is change the encrypted connection under Incoming server to SSL. This will automatically change the port to 993. If you had selected POP3 on the previous page, the port would be 995. We are showing 993 here because we chose IMAP. Under Outgoing server, change the encrypted connection to TLS. You may need to type in the port number 587 if it doesn't change automatically.
    18.jpg
  8. Now click on the Outgoing Server tab at the top of the Internet E-mail Settings dialog box. THIS IS THE MOST IMPORTANT SCREEN IN THESE INSTRUCTIONS! It may look different depending on whether you've chosen POP3 or IMAP. But the important thing remains the same: Always choose My outgoing server (SMTP) requires authentication. And you have a choice at this point. Either click Use same settings as incoming mail server or type everything in under Log on using. We have chosen to fill this out to demonstrate what it looks like.
    11.jpg
  9. After you click OK you will be back at the Add New Account dialog box. Click the Test Account Settings button.
    13.jpg
  10. If everything has been typed in correctly, you should see this Congratulations dialog. You're done!
    14.jpg

2007

Tested on Outlook 2007 on XP and Vista.

Change account.jpg

  1. Go to Tools > Account Settings
  2. Click the "Email" tab
  3. Select the account you want to change
  4. Click the "Change" button

Outlook dv.jpg

User Information
Your name John Doe
E-mail Address you@domain.com
Server Information
Account Type POP3
Incoming mail server securemail.netsville.com
Outgoing mail server (SMTP) securemail.netsville.com
Logon Information
User Name you@domain.com
Password <your password>


  1. Click on the "More Settings" button
  2. Click the "Advanced" tab

Change account data.jpg

  1. Change the following options:
    1. Check "This server requires an encrypted connection (SSL)"
    2. Change "Outgoing server (SMTP)" port to 587
      • Note: You can try to use port 25, but some ISPs block this port
    3. Choose "TLS" for the dropdown box for "Use the following type of encrypted connection"
      • TLS is no longer required as of 20 Oct 2011. If you cannot get your email to work, remove the TLS encryption and try again.
  2. Click the "Okay" button
  3. Click the "Next >" button
  4. Click the "Finish" button

Send a test email to yourself. If you successfully send and receive it, your account is set up properly.

2003

Use the setup steps described in this article: Setting Up Your E-mail in Microsoft Outlook

Retrieved from "https://support.netsville.com/index.php?title=Outlook&oldid=557"